CVE-2021-45033
A vulnerability has been identified in CP-8000 MASTER MODULE WITH I/O -25/+70°C (All versions < V16.20), CP-8000 MASTER MODULE WITH I/O -40/+70°C (All versions < V16.20), CP-8021 MASTER MODULE (All v…
All CVEs associated with "Default Credentials". Page 3/5 • 518 CVEs.
Subscribe CVEs: RSS for “Default Credentials” · RSS (High+Critical only)
A curated feed of “Default Credentials”-related CVEs appears below. We currently track 518 CVEs for this tag (all time). In the last 365 days, 100 were published. Average CVSS is 8.4 (all time; 8.0 over 365d), and 84% are rated High/Critical (all time). Top CWEs (last 365 days): CWE-1392 - Use of Default Credentials, CWE-798 - Use of Hard-coded Credentials, CWE-1393 - Use of Default Password.
In our taxonomy this topic maps to a HIGH impact class. Vendor advisories and release notes are key. Verify compatibility matrices, prefer supported long term versions, and stage rollouts with monitoring. Use the filters below to sort by CVSS, risk and CWE. Each detail page highlights vendor advisories and mitigation tips.
CVEs tagged with this topic. Filters apply to the whole list (loaded from JSON).
A vulnerability has been identified in CP-8000 MASTER MODULE WITH I/O -25/+70°C (All versions < V16.20), CP-8000 MASTER MODULE WITH I/O -40/+70°C (All versions < V16.20), CP-8021 MASTER MODULE (All v…
Netgear RAX43 version 1.0.3.96 does not have sufficient protections to the UART interface. A malicious actor with physical access to the device is able to connect to the UART port via a serial connec…
IBM Spectrum Copy Data Management 2.2.13 and earlier has weak authentication and password rules and incorrectly handles default credentials for the Spectrum Copy Data Management Admin console. IBM X-…
SYNEL - eharmonynew / Synel Reports - The attacker can log in to the system with default credentials and export a report of eharmony system with sensetive data (Employee name, Employee ID number, Wor…
Raspberry Pi OS through 5.10 has the raspberry default password for the pi account. If not changed, attackers can gain administrator privileges.
Wokka Lokka Q50 devices through 2021-11-30 allow remote attackers (who know the SIM phone number and password) to listen to a device's surroundings via a callback in an SMS command, as demonstrated b…
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remot…
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remot…
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remot…
A use of hard-coded password vulnerability in the Moxa MXview Network Management software Versions 3.x to 3.2.2 may allow an attacker to gain access through accounts using default passwords
A vulnerability in TOTOLINK A720R A720R_Firmware v4.1.5cu.470_B20200911 allows attackers to start the Telnet service, then login with the default credentials via a crafted POST request.
An insecure permissions issue was discovered in HMI3 Control Panel in Swisslog Healthcare Nexus Panel operated by released versions of software before Nexus Software 7.2.5.7. A user logged in using t…
TX9 Automatic Food Dispenser v3.2.57 devices allow access to a shell as root/superuser, a related issue to CVE-2019-16734. To connect, the telnet service is used on port 23 with the default password…
Dr. ID Door Access Control and Personnel Attendance Management system uses the hard-code admin default credentials that allows remote attackers to access the system through the default password and o…
The vulnerability of hard-coded default credentials in QSAN SANOS allows unauthenticated remote attackers to obtain administrator’s permission and execute arbitrary functions. The referred vulnerabil…
This vulnerability allows remote attackers to execute arbitrary code on affected installations of GE Reason RPV311 14A03. Authentication is not required to exploit this vulnerability. The specific fl…
D-Link DIR-2640-US 1.01B04 is vulnerable to Incorrect Access Control. Router ac2600 (dir-2640-us), when setting PPPoE, will start quagga process in the way of whole network monitoring, and this funct…
A flaw was found in the ceph-ansible playbook where it contained hardcoded passwords that were being used as default passwords while deploying Ceph services. Any authenticated attacker can abuse this…
Hongdian H8922 3.0.5 devices have an undocumented feature that allows access to a shell as a superuser. To connect, the telnet service is used on port 5188 with the default credentials of root:superz…
Dell EMC Integrated System for Microsoft Azure Stack Hub, versions 1906 – 2011, contain an undocumented default iDRAC account. A remote unauthenticated attacker, with the knowledge of the default cre…
iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell…
Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called…
An issue was discovered in Svakom Siime Eye 14.1.00000001.3.330.0.0.3.14. By sending a set_params.cgi?telnetd=1&save=1&reboot=1 request to the webserver, it is possible to enable the telnet interface…
An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. When using the device at initial setup, a default password is used (123456) for administrative purposes. There is no p…
An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. It performs actions based on certain SMS commands. This can be used to set up a voice communication channel from the w…
Open5GS 2.1.3 listens on 0.0.0.0:3000 and has a default password of 1423 for the admin account.
HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.
Improper input validation in database creation logic in Odoo Community 11.0 and earlier and Odoo Enterprise 11.0 and earlier, allows remote attackers to initialize an empty database on which they can…
In the Broadcom Nexus firmware, there is an insecure default password. This could lead to local information disclosure in the kernel with no additional execution privileges needed. User interaction i…
In the Broadcom Nexus firmware, there is an insecure default password. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction…
The SD-WAN Orchestrator 3.3.2, 3.4.x, and 4.0.x has default passwords allowing for a Pass-the-Hash Attack. SD-WAN Orchestrator ships with default passwords for predefined accounts which may lead to t…
The firmware of the PLANET Technology Corp NVR-915 and NVR-1615 before 2020-10-28 embeds default credentials for root access via telnet. By exposing telnet on the Internet, remote root access on the…
Use of default credentials for the telnet server in BASETech GE-131 BT-1837836 firmware 20180921 allows remote attackers to execute arbitrary system commands as the root user.
Airleader Master <= 6.21 devices have default credentials that can be used to access the exposed Tomcat Manager for deployment of a new .war file, with resultant remote code execution.
Airleader Master and Easy <= 6.21 devices have default credentials that can be used for a denial of service.
Winston 1.5.4 devices make use of a Monit service (not managed during the normal user process) which is configured with default credentials.
SAP Solution Manager and SAP Focused Run (update provided in WILY_INTRO_ENTERPRISE 9.7, 10.1, 10.5, 10.7), allows an unauthenticated attackers to bypass the authentication if the default passwords fo…
Jfrog Artifactory uses default passwords (such as "password") for administrative accounts and does not require users to change them. This may allow unauthorized network-based attackers to completely…
An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on t…
An issue was discovered in Hyland OnBase through 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. CSRF can be used to log in a user,…
MAGMI versions prior to 0.7.24 are vulnerable to a remote authentication bypass due to allowing default credentials in the event there is a database connection failure. A remote attacker can trigger…
An issue was discovered on Spirent TestCenter and Avalanche appliance admin interface firmware. An attacker, who already has access to an SSH restricted shell, can achieve root access via shell metac…
Cayin CMS suffers from an authenticated OS semi-blind command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user…
An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. They do not require users to change th…
The IRC5 family with UAS service enabled comes by default with credentials that can be found on publicly available manuals. ABB considers this a well documented functionality that helps customer set…
Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has the cloud1234 password for the a1@chopin account default credentials.
The access tokens for the REST API are directly derived from the publicly available default credentials for the web interface. Given a USERNAME and a PASSWORD, the token string is generated directly…
The access tokens for the REST API are directly derived (sha256 and base64 encoding) from the publicly available default credentials from the Control Dashboard (refer to CVE-2020-10270 for related fl…
A security misconfiguration vulnerability exists in the SDK of some Realtek ADSL/PON Modem SoC firmware, which allows attackers using a default password to execute arbitrary commands remotely via the…
A vulnerability in the virtual console authentication of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers…
Dell EMC Isilon versions 8.2.2 and earlier contain a remotesupport vulnerability. The pre-configured support account, remotesupport, is bundled in the Dell EMC Isilon OneFS installation. This account…
IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 contains a default password for an IDRM administrative account. A remote attacker could exploit this vulnerability to login and exec…
The Jitsi Meet (aka docker-jitsi-meet) stack on Docker before stable-4384-1 uses default passwords (such as passw0rd) for system accounts.
The factory configuration for vMX installations, as shipped, includes default credentials for the root account. Without proper modification of these default credentials by the administrator, an attac…
GE Mark VIe Controller has an unsecured Telnet protocol that may allow a user to create an authenticated session using generic default credentials. GE recommends that users disable the Telnet service.
DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system.
Certain Xerox WorkCentre printers before 073.xxx.000.02300 do not require the user to reenter or validate LDAP bind credentials when changing the LDAP connector IP address. A malicious actor who gain…
A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default…
The Web Panel in Netsweeper before 4.0.5 has a default password of branding for the branding account, which makes it easier for remote attackers to obtain access via a request to webadmin/.
Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version…
Use of default credentials for the TELNET server in Petwant PF-103 firmware 4.3.2.50 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.
mcollective has a default password set at install
The express install, which is the suggested way to install Puppet Enterprise, gives the user a URL at the end of the install to set the admin password. If they do not use that URL, there is an overlo…
FreeSWITCH 1.6.10 through 1.10.1 has a default password in event_socket.conf.xml.
In Zmanda Management Console 3.3.9, ZMC_Admin_Advanced?form=adminTasks&action=Apply&command= allows CSRF, as demonstrated by command injection with shell metacharacters. This may depend on weak defau…
CA Performance Management 3.5.x, 3.6.x before 3.6.9, and 3.7.x before 3.7.4 have a default credential vulnerability that can allow a remote attacker to execute arbitrary commands and compromise syste…
CA Network Flow Analysis 9.x and 10.0.x have a default credential vulnerability that can allow a remote attacker to execute arbitrary commands and compromise system security.
CoreOS Tectonic 1.7.x and 1.8.x before 1.8.7-tectonic.2 deploys the Grafana web application using default credentials (admin/admin) for the administrator account located at grafana-credentials secret…
Black Box iCOMPEL 9.2.3 through 11.1.4, as used in ONELAN Net-Top-Box 9.2.3 through 11.1.4 and other products, has default credentials that allow remote attackers to access devices remotely via SSH,…
IBM Open Power Firmware OP910 and OP920 could allow access to BMC via IPMI using default OpenBMC password even after BMC password was changed away from the default password. IBM X-Force ID: 158702.
Lierda Grill Temperature Monitor V1.00_50006 has a default password of admin for the admin account, which allows an attacker to cause a Denial of Service or Information Disclosure via the undocumente…
A vulnerability in Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to log in t…
A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to view a password in clear text. The vulnerability is due to i…
The installation process in Open edX before 2017-01-10 exposes a MongoDB instance to external connections with default credentials.
An issue was discovered that affects the following versions of Rancher: v2.0.0 through v2.0.13, v2.1.0 through v2.1.8, and v2.2.0 through 2.2.1. When Rancher starts for the first time, it creates a d…
On AVTECH Room Alert 3E devices before 2.2.5, an attacker with access to the device's web interface may escalate privileges from an unauthenticated user to administrator by performing a cmd.cgi?actio…
Invoxia NVX220 devices allow TELNET access as admin with a default password.
Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using b…
Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices have default credentials that are hardcoded in the firmware and can be extracted by anyone who reverses the firmware to identify them. If the firmwa…
Linear eMerge E3-Series devices have Default Credentials.
Nortek Linear eMerge 50P/5000P devices have Default Credentials.
Prima Systems FlexAir devices have Default Credentials.
In the ABB IDAL FTP server, an authenticated attacker can traverse to arbitrary directories on the hard disk with "CWD ../" and then use the FTP server functionality to download and upload files. An…
An issue was discovered on Moxa AWK-3121 1.14 devices. The device enables an unencrypted TELNET service by default. This allows an attacker who has been able to gain an MITM position to easily sniff…
Computrols CBAS 18.0.0 has Default Credentials.
An exploitable vulnerability exists in the Wi-Fi Access Point feature of the Roav A1 Dashcam running version RoavA1SWV1.9. A set of default credentials can potentially be used to connect to the devic…
A vulnerability in the Secure Shell (SSH) authentication process of Cisco Small Business Switches software could allow an attacker to bypass client-side certificate authentication and revert to passw…
The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has two user accounts with default passwords, including a hardcoded service account with the userna…
The Billion 5200W-T TCLinux Fw $7.3.8.0 v008 130603 router distributed by TrueOnline has three user accounts with default passwords, including two hardcoded service accounts: one with the username tr…
The ZyXEL P660HN-T1A v2 TCLinux Fw #7.3.37.6 router distributed by TrueOnline has three user accounts with default passwords, including two hardcoded service accounts: one with the username true and…
Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 use default credentials admin/admin and moderator/moderator for the web interface. An unauthenticated, remote attacker can use t…
An issue was discovered in JFrog Artifactory 6.7.3. By default, the access-admin account is used to reset the password of the admin account in case an administrator gets locked out from the Artifacto…
The BluStar component in Mitel InAttend before 2.5 SP3 and CMG before 8.4 SP3 Suite Servers has a default password, which could allow remote attackers to gain unauthorized access and execute arbitrar…
A hidden backdoor on PATLITE NH-FB Series devices with firmware version 1.45 or earlier, NH-FV Series devices with firmware version 1.10 or earlier, and NBM Series devices with firmware version 1.09…
A vulnerability in the management web interface of Cisco Network Assurance Engine (NAE) could allow an unauthenticated, local attacker to gain unauthorized access or cause a Denial of Service (DoS) c…
An issue was discovered on MOBOTIX S14 MX-V4.2.1.61 devices. There is a default password of meinsm for the admin account.
LifeSize Team, Room, Passport, and Networker 220 devices allow Authenticated Remote OS Command Injection, as demonstrated by shell metacharacters in the support/mtusize.php mtu_size parameter. The li…
Premisys Identicard version 3.1.190 database uses default credentials. Users are unable to change the credentials without vendor intervention.
Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all d…
FreeSWITCH through 1.8.2, when mod_xml_rpc is enabled, allows remote attackers to execute arbitrary commands via the api/system or txtapi/system (or api/bg_system or txtapi/bg_system) query string on…
TP-Link Archer C5 devices through V2_160201_US allow remote command execution via shell metacharacters on the wan_dyn_hostname line of a configuration file that is encrypted with the 478DA50BF9E3D2CF…
Philips iSite and IntelliSpace PACS, iSite PACS, all versions, and IntelliSpace PACS, all versions. Default credentials and no authentication within third party software may allow an attacker to comp…
Integrated Data Protection Appliance versions 2.0, 2.1, and 2.2 contain undocumented accounts named 'support' and 'admin' that are protected with default passwords. These accounts have limited privil…
An issue was discovered on EE 4GEE HH70VB-2BE8GB3 HH70_E1_02.00_19 devices. Hardcoded root SSH credentials were discovered to be stored within the "core_app" binary utilised by the EE router for netw…
All versions of Hangzhou Xiongmai Technology Co., Ltd XMeye P2P Cloud Server may allow an attacker to use an undocumented user account "default" with its default password to login to XMeye and access…
Martem TELEM GW6/GWM versions prior to 2.0.87-4018403-k4 may allow unprivileged users to modify/upload a new system configuration or take the full control over the RTU using default credentials to co…
LINK-NET LW-N605R devices with firmware 12.20.2.1486 allow Remote Code Execution via shell metacharacters in the HOST field of the ping feature at adm/systools.asp. Authentication is needed but the d…
On Dell 2335dn printers with Printer Firmware Version 2.70.05.02, Engine Firmware Version 1.10.65, and Network Firmware Version V4.02.15(2335dn MFP) 11-22-2010, the admin interface allows an authenti…
An attacker without authentication can login with default credentials for privileged users in Eltex ESP-200 firmware version 1.2.0.
Router Default Credentials in Kraftway 24F2XG Router firmware version 3.5.30.1118 allow remote attackers to get privileged access to the router.
Harmonic NSG 9000 devices have a default password of nsgadmin for the admin account, a default password of nsgguest for the guest account, and a default password of nsgconfig for the config account.
A vulnerability was found in openstack-tripleo-heat-templates before version 8.0.2-40. When deployed using Director using default configuration, Opendaylight in RHOSP13 is configured with easily gues…
Hughes high-performance broadband satellite modems, models HN7740S DW7000 HN7000S/SM, uses hard coded credentials. Access to the device's default telnet port (23) can be obtained through using one of…
Synology NAS servers DS107, firmware version 3.1-1639 and prior, and DS116, DS213, firmware versions prior to 5.2-5644-1, use non-random default credentials of: guest:(blank) and admin:(blank) . A re…
Nuuo NT-4040 Titan, firmware NT-4040_01.07.0000.0015_1120, uses non-random default credentials of: admin:admin and localdisplay:111111. A remote network attacker can gain privileged access to a vulne…
Green Packet DX-350 uses non-random default credentials of: root:wimax. A remote network attacker can gain privileged access to a vulnerable device.
Intellian Satellite TV antennas t-Series and v-Series, firmware version 1.07, uses non-random default credentials of: ftp/ftp or intellian:12345678. A remote network attacker can gain elevated access…
An issue was discovered on Dongguan Diqee Diqee360 devices. The affected vacuum cleaner suffers from an authenticated remote code execution vulnerability. An authenticated attacker can send a special…
Sollae Serial-Ethernet-Module and Remote-I/O-Device-Server devices have a default password of sollae for the TELNET service.
Arris Touchstone Telephony Gateway TG1682G 9.1.103J6 devices are distributed by some ISPs with a default password of "password" for the admin account that is used over an unencrypted http://192.168.0…